Português
Switch Brake with Wiring [Jefftron]
- Write a review
€31.90
Tax included
Política de segurança
(editar com o módulo Customer Reassurance)
Guarantee safe & secure checkout
Precisely and professionally made drop-in MOSFET system with active motor braking designed for Airsoft Electric Guns in the specific V2-type gearbox. The device is installed in the place of the standard micro switch in the gearbox.
Active breaking solves problems with multiple shots in semi-mode in airsoft replicas with a very high rate of fire.
Mosfet increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
Active breaking solves problems with multiple shots in semi-mode in airsoft replicas with a very high rate of fire.
Mosfet increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
- Simple installation inside the V2-type gearbox in place of the original microswitch
- Pre-soldered wires allow for faster and easier installation into the replica. Wires are provided with the additional length for user adaptation.
- Two high-quality AWG16 1,5mm wires with a length of 300 and 700 mm. Blue AWG24 0.34qmm wire with protective coating insulation sleeve and a length of 1000 mm.
- Mainboard covered with conformal coating for water resistance.
- Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
- Ideal for popular batteries up to 17V (Ni-xx 8.4 - 12V, Li-Po 7.4 - 14.8V).
- No current consumption in the idle mode and no sparking on the switch contacts.
11247600000
12 Items
Data sheet
- Weight
- Length packed
- Width packed
- Height packed
- Weight packed
16 other products in the same category:
![Pico SSR 3 Mosfet [Gate]](https://www.hangar18.pt/28177-home_default/xpico-ssr-3-mosfet-gate.jpg.pagespeed.ic.8GSMSn2DrZ.webp)
Availability: Out of stock
ASTER V2 is a younger brother of well-known TITAN V2. This world's first 4th generation AEG Control System is destined for most of AEGs with gearbox V2 on the market and even for high-tuned guns (in case of EXPERT firmware). It was designed to achieve maximum reliability at attractive price and hence it has extremely profitable price-performance ratio.
Availability: Out of stock
PicoSSR 3 is the world's smallest MOSFET for AEG. Even though its dimensions are merely 4x6x21 mm, PicoSSR 3 is very powerful. It has great electrical and mechanical parameters and fits replicas with little space for MOSFET.
Additionally, it is fully resistant to water immersion (after heatshrink tube fitting). It can work with the strongest AEG replicas - maximum battery rated voltage is 12.8V.
![Titan V3 Expert Blu-Set [Gate]](https://www.hangar18.pt/28179-home_default/xtitan-v3-expert-blu-set-gate.jpg.pagespeed.ic.7xbgikZHMQ.webp)
Availability: Out of stock
TITAN™ (drop-in mosfet) will transform your AEG into an advanced training weapon system. Gain a tactical advantage thanks to the extremely fast trigger response, with an option of adjusting the AEG for each mission with 20 functions. Give your AEG a new lease of life!
![STATUS [Gate]](https://www.hangar18.pt/28187-home_default/status-gate.jpg)
