AEG M4 SA-F01 FLEX Black [Specna Arms]

The SA-F01 is one of the first from Specna Arms' FLEX™ line, designed with the objective of outdoing their renowned CORE™ line in the lightweight, low-cost AEG game. Specna has maintained the robust, reliable and simple internals that made the CORE™ series such impressive and dependable platforms, and has replaced some of the alloy components present in the CORE™ line with fibre reinforced polymer parts, even further reducing the overall weight of the rifle and increasing its resistance to scratches.

Starting at the tip of the alloy outer barrel we can find an alloy birdcage flash hider, which mounts to the 14mm CCW male threads. The birdcage has the classic M4/AR15 look, but can easily be swapped out for a muzzle brake for a more custom style, a tracer unit for come CQB action or a suppressor if you have more of a sneaky play style. The outer barrel of the SA-F01 is 9-inches in length, giving this rifle some superb utility in CQB and making it much easier to corner with than a longer AEG.

Surrounding the 9-inch alloy outer barrel we have the polymer handguard, which is styled after the KAC URX3 and gives the rifle a compact and manoeuvrable front end. The handguard is designed to provide 20mm Picatinny rails only at the positions they will be used, and as such includes a short section of Picatinny at the front end, at the 3, 6 and 9 o'clock positions. Behind the Picatinny rails, the handguards are recessed slightly to provide a comfortable position to hold the rifle without requiring additional rail covers.  The 3 and 9 o'clock positions also boast a QD sling socket which can be used together with QD sling studs and the QD sling sockets on the stock for a highly flexible sling setup that can be removed in an instant. The 12 o'clock position provides a full length 20mm Picatinny rail which integrates seamlessly with the receiver rail to allow for longer optical sights to be used, or red dot sight magnifier combos. As it arrives, the SA-F01 is equipped with a pair of flip-up aperture iron sights, both of which are fully adjustable for windage and elevation. The sights can be deployed by pressing the textured tabs on each, which will snap the sights into position under spring pressure. To stow the sights, simply push them back down and they will lock into place.

As we arrive at the receiver, we see a familiar sight; M4/AR15 controls, with a well placed fire selector sitting beneath a right-handed shooters thumb, a dummy bolt catch in the centre of the receiver on the left side, and the magazine release, which is located on the magazine well on the right side of the AEG. The controls on the SA-F01 are set up for right-handed users but can be operated by a left-handed user without issue after a bit of practice. The fire selector provides 3 modes of fire, SAFE-SEMI, and AUTO, which are denoted by recessed text surrounding the fire selector lever. Each fire mode has a 90-degree throw between, making it super easy to switch from SAFE to SEMI as you bring the AEG up and align the sights. The magazine release is protected by a moulded in "fence" which protects the release from inadvertently being pushed as your rifle brushes against your kit. The charging handle can be found at the top rear of the receiver and features an extended latch which protrudes on the left side for fast access and one-handed operation. When the charging handle is pulled, the dust cover on the right side will open, and the mock bolt carrier will retract, revealing the rotary HOP-up unit within. This device allows the user to adjust the amount of backspin applied to the BB and tune it to provide optimum range and a stable flight path with various weights of BBs. For the SA-F02, we recommend 0.25g for the best combination of projectile speed, wind resistance, and range.

The pistol grip provided on the SA-F01 is an "A2" finger ridged type, with diamond checkering on either side and linear grooves on the rear to provide positive grip. The A2 grip finds its way onto many M4/AR15 AEGs, primarily due to its classic looks and its suitability for a variety of hand types. This grip has a nice large motor adjustment screw, which is great to see as more affordable replicas often use a small grub screw for this role, which we have often found to be inadequate. The SA-F01 also uses the M4/AR15 modular trigger guard system, allowing the trigger guard to be changed out for an enlarged one, as long as the replacement guard is of AEG spec. The pre-installed trigger guard is a standard M4A1 flat type, made from polymer to keep the build lightweight. At the very back of the receiver, we can find our ambidextrous "CQD" type sling plate, which allows a single point bungee sling to be used with the rifle and installed on either the left or right side. This sling plate is constructed from steel, giving it the prerequisite strength to support the weight of the rifle.

Moving to the rear, we can find a 6 position M4/AR15 buffer tube, constructed from the same high density polymer as the receiver. This keeps the build light and prevents your buffer tube from becoming worn from constant stock adjustments, which often removes the finish on metal buffer tubes and makes them look tatty. The crane battery stock runs on this buffer tube and can be adjusted to any of the 6 positions by holding down the textured adjustment lever on the bottom of the stock and adjusting it to the desired length. On either side of the stock, we can find QD sling sockets, which when coupled with a QD sling stud, can provide a flexible sling set up with quick release functionality. The battery compartment of the SA-F01 is within its crane stock, and can house up to a 7.4V 1300 mAh LiPo battery in nunchuck/crane configuration. The battery compartment can be accessed through the butt plate of the stock. This can be achieved by pushing the two protruding tabs at the toe of the stock together, and then through the stock to the rear, after which the butt plate can be pulled downwards, and removed. With the butt plate removed, you can remove the battery compartment plug, and insert your battery into the "cheeks" of the stock, connecting up the mini-Tamiya connector found inside the buffer tube to your battery.

If you are looking for something to cut around with when your arms are burning from running a full metal rifle all day, the FLEX™ series would suit the role well thanks to its lightweight yet robust construction. Equally, if you have upgraded your primary AEG extensively on the inside for high performance and you need a dependable backup for the event that your primary goes down mid skirmish, the SA-F01 is equipped for the job and can hold its own in most scenarios thanks to its upgraded tight bore inner barrel and modern rotary adjustable HOP-up unit. For new players, particularly those with lower physical strength, the SA-F01 will have you as well equipped to rack up the kills as most full metal AEGs would, with the added benefit that if yours takes a bump or scrape it will still maintain its finish and good looks!

Other Features:

• Fibre reinforced polymer receiver
• Rotary adjustable HOP-up unit
• 6.03mm Tightbore inner barrel
• 8mm bearings with steel gears
• ESA™ quick change spring system
• 14mm CCW male threaded alloy outer barrel
• QD sling sockets on the stock
• 6 Position Crane battery stock
• Flip-up iron sights pre-installed
• Extended charging handle latch
• Polymer URX3 style handguard with QD sling sockets

Package Includes:

• SA-F01 Flex Carbine
• Magazine Hi-Cap 300rnd
• Flip-Up removable iron sights
• Instruction Manual
• Additional Main Spring

MANUFACTURER LINK

MANDATORY LICENSE BY LAW, LAW No. 50/2013, CONDITIONAL SALE

CONDITIONED SALE TO PEOPLE OVER 18 YEARS OLD, OR MINORS UNDER AUTHORIZATION (IN WRITING) OF THE PARENTAL POWER.

It is mandatory to present proof of membership in an APD (Sports Promotion Association), if you order one, please send proof and indicate the order number to the email: geral@hangar18.pt

Maximum allowable power: 1.3J (~ 374 FPS / 0.20g)

It should be painted with a yellow or red fluorescent color (in the dimensions defined by law). The weapons are always painted according to the law in fluorescent yellow.

COUNTER-ORDENATIONAL RESPONSIBILITY:

Article 97.
Illegal gun possession

1 - Whoever, without being authorized, outside the legal conditions or contrary to the prescriptions of the competent authority, owns, transports, imports, stores, buys, acquires in any capacity or by any means or obtains by manufacture, transformation, import or export , use or bring with you a reproduction of a firearm, alarm weapon, salvo or alarm ammunition or weapons of the F and G classes, is punishable by a fine of € 400 to € 4000.